• CNC MACHINED 6061-T56 ALUMINUM BODY WITH A 35MM ID
• INCLUDES 1 RAZOR PIN MACHINED WITH A 0.012" THROAT FOR MINIMUM TARGET OBSTRUCTION
• EIGHT RAZOR PIN LOCATIONS
• EIGHT 8-32 THREADED HOLES FOR OPTIONAL INTEGRATED PIN KIT OR TAK KIT
• 7/16”-20 THREADED HOLE FOR OPTIONAL RHEOSTAT LIGHT
• TEXTURED INTERIOR CUTS DOWN ON GLARE
• COMES WITH THREE COLORED LEVELS (RED, GREEN, AND BLUE)
• INCLUDES THREE STICKS OF FIBER (ORANGE, GREEN, AND BLUE)
• FEATURES A CHANNEL FOR RETAINING OPTIONAL FIBER OPTIC TUBING
• EIGHT LOCATIONS FOR AN OPTIONAL LIGHT ADDITION
• A VARIETY OF OPTIONAL SUNSHADES CAN BE THREADED INTO THE FRONT AND REAR OF THE SCOPE

ALL SHREWD SCOPES ARE MACHINED WITH A RECESSED HEX POCKET TO ADAPT TO A STANDARD ROUND, HEX, OR SQUARE SCOPE MOUNTING ROD. THIS FEATURE IS DESIGNED SO THE SCOPE WILL NOT ROTATE ON THE MOUNTING BRACKET.  WHEN MOUNTING THE SCOPE ONTO A SCOPE ROD THE INCLUDED HEX NUT ON THE OUTSIDE OF THE SCOPE SHOULD BE REMOVED BEFORE THE SCOPE ROD IS THREADED ONTO THE 10-32 THREADED ROD. IN SOME CASES THE LONGER 10-32 ROD SHOULD BE SUBSTITUTED FOR THE SHORTER, 1-1/4" 10-32 BOLT INCLUDED IN THE PACKAGING.

COMPATIBILITY:

• B3 - REQUIRES THE USE OF THE 10-32 X 1/2" BUTTON HEAD SCREW THAT COMES STOCK WITH THE B3 SIGHT WHEN MOUNTING THE SCOPE.
• AXCEL - CAN MOUNT TO THE STOCK AXCEL SCOPE ROD BUT WILL REQUIRE A 10-32 X 2.5" BUTTON HEAD BOLT OR THE STOCK SCOPE ROD CAN BE REPLACED WITH A 1/2" SHREWD SCOPE ROD.
• SPOT HOGG - REQUIRES A 3/8" SHREWD SCOPE ROD.
• SURE-LOC - CAN MOUNT TO THE STOCK SCOPE ROD BUT MAY REQUIRE A 10-32 X 2.5" BUTTON HEAD BOLT OR THE STOCK SCOPE ROD CAN BE REPLACED WITH A 3/8" OR .455" SCOPE ROD DEPENDING ON THE SIGHT MODEL